Dealers information at 24th January 1975
Honda (UK) Limited Registered No. 857969 London Registered Office:
Power Road, Chiswick London W4 5YT

TECHNICAL SPECIFICATION

CB400 F (FOUR)

ENGINE UNIT

        Type: Air cooled, 4-stroke, O.H.C.
        Cylinder Arrangement: Vertical four parallel
        Bore and stroke: 51 x 50 mm
        Capacity: 408 cc
        Compression Ratio: 9.4 : 1
        Carburetor: Keihin piston valve type
        Venturi diameter 20mm. Main jet 75
        Max. Horsepower: 37 B.H.P. at 8,500 r.p.m.
        Max. Torque: 3.2 Kg.M at 7,500 r.p.m.
        Oil capacity: 3.5 litre
        Lubrication system: Forced and wet sump
        Fuel required: 91 octane or higher
        Air filtration: paper element
        Valve clearance: 0.05 mm inlet and exhaust
        Engine weight: 64kg (dry)
        Air screw setting: 2 plus or minus a half
        Idle speed: 1,200 r.p.m.

TRANSMISSION

        Clutch: Wet multi-plate type
        Gearbox: 6 speed constant mesh
        Primary Reduction: 3.423
        Gear Ratio 1 2.733
            ”      ”     2 1.800
            ”      ”     3 1.375
            ”      ”     4 1.111
            ”      ”     5 0.965
            ”      ”     6 0.866
        Final reduction: 2.235
        drive sprocket 17T
        driven sprocket 38T


ELECTRICAL SYSTEM

        Ignition: Battery and coil
        Starting: Starter motor and kick-starter
        Alternator: A.C. Generator, output 156w at 5,000 r.p.m.
        Battery: 12v. 12ah
        Fuse capacity: 7 + 7 + 15 amp.
        Spark plug: NGK. D-8ES-L



CYCLE PARTS

        Overall length:  2035 mm
             ”      width:    705 mm
             ”      height: 1040 mm (not including rear mirror)
        Wheel base: 1355 mm
        Seat height: 795 mm
        Ground clearance: 150 mm
        Dry weight: 170kg
        Curb weight: 183kg
        Weight distribution: F/R 87/96 kg (at curb weight)

SUSPENSION

        Frame: Semi-double cradle
        Front suspension: Telescopic type, travel 114.5 mm
        Rear         ”        : Swinging arm, ” 79 mm
        Front tyre size: 3.00 S 18 4 pr. rib pattern
        Rear    ”      ”  : 3.50 S 18 4 pr. block pattern
        Tyre pressure : front 1.8 kg/sq. cm
                              : rear 20 kg/sq. cm high speed )
                              > 25 kg/sq. cm high load )
        Front brake pad swept area 38 sq. cm
        Disc effective diameter 214 mm
        Rear brake internal expanding
        Lining swept area 70 sq. mm. Drum diameter 160 mm
        Fuel capacity: 14 lit.
        Reserve capacity: 3 lit.
        Caster angle: 63 deg. 30 min.
        Trail length: 85 mm
        Front fork oil capacity: 160 – 165 cc dry, 145 cc Wet

Japanese Directors:- K. Kawashima N. Okamura T. Sumida (Sec.) K. Suzuki.